Solar Powered Ultrasonic Animal Repeller PIR Motion Sensor
Adopt advanced ultrasonic and PIR technology, our ultrasonic animal repeller offers you an optional solution for repelling unwanted animals or pests by emitting powerful ultrasonic wave, strong LED flash light and loud alarm. Powered by solar panel in the sun or charged by USB cord, it can work for a long time. Besides, IP66 waterproof rating allows it to be inserted or hanged outdoor without damage from rain and snow, a good protection for your gardens, farms, and so on!
Features:
- Upgraded & PIR & Ultrasonic Technology: Adopted advanced ultrasonic, PIR motion technology, our animal repeller can effectively repel most animals and pests by emitting powerful ultrasonic wave, effective for an area up to 1,615 sq.ft and a distance up to 32.81ft with 120° sensing angle.
- Multiple Repelling Settings: The adjustable frequency makes it more effective to get rid of different animals you need to repel, such as cats, dogs, birds, mice, squirrels, rats, skunks, raccoon, birds, deer, mosquitoes and more or set it to repel all of them at the same time. The volume-adjustable alarm and strong LED flash light help you drive the aggressive animals that adapt and become immune to a certain frequency band. Besides, no traps, no harm to human or animals and chemical free.
- Solar Powered & USB Charging: With high photoelectric conversion polysilicon solar panel on the top, it can be charged by solar panel under the sun for about 10-12 hours and USB charged for about 2-3 hours, then work for about 10-12 days without solar light and work for a long time with solar light.
- IP66 Waterproof: IP66 Waterproof design makes it keep working in rainy, snowy or freezing weather conditions no matter in the yards, patios, garages, attics, porches, boats, gardens, farms, ponds or when you are camping.
- Two Installation Methods: You can simply insert the animal repeller into the ground with a removable pole (included) or hang up where there is plenty of sun light with a portable hook on the top. Note: Please leave the pole about 9-10 inches or more above the ground. Don’t hammer directly on the device but dig a hole to mount it.
Note:
- It is recommended to charge the battery via USB cord for the first time use before installation. It usually takes 2-3 hours to be fully charged.
- Please switch the “Frequency” knob (Right knob) to turn ON the repeller.
- Usually ultrasonic products will not produce instant effects, it may take 10-15 days to deliver the full deterrent effect.
- The device is IP66 protected, but never soak the product in water. Tilting or falling on ground may cause the device damaged by water during raining.
- The audible alarm is very helpful for deterring some aggressive animals especially birds; however, you can turn it off or turn down the volume if the alarm beeps disturb your or neighbor’s life.
- In case some functions like emitting ultrasound, flashing lights or audible alarm fail after a period of time, the battery’s power may be depleted. Please try to charge the battery via USB cord to truly regain power.
- Please install the device to the direction that animals come from to get better effect.
- The installation height depends on size of animals. The bigger of the animal’s size, the higher it should be installed. For some big size animals, we recommend you device hang the device on a wall/fence.
- For better results, please keep the head of the device 9-10 inches above the around.
- Twist “Audible Alarm” knob to turn on/off alarm beeps, and adjust the volume (clockwise to turn up the volume).
- Twist “Frequency” knob to turn on/off ultrasonic wave and LED flashing, and choose different frequency bands for different animal.
- 18650 Lithium battery is not recommended to be removed.
- Please peel off the transparent protective coating on the top of solar panel to ensure it can absorb sunlight efficiently.
- Do not cover up the PIR sensor, choose a place where the solar panel on the top can get as long time sunshine as possible.
